This is a simple guide how to install Litrohub Kitchen hood? Installing a kitchen hood DIY may feel overwhelming at first, but it doesn’t have to be complicated. With a few basic tools and proper knowledge, you can easily do it yourself.
A kitchen hood is a basic necessity in modern homes. Cooking releases smoke, grease, steam, and odor that can cause multiple problems if not ventilated well. The smoke, grease, and steam can attach to the kitchen wall and make it greasy and dirty. The air quality of your house can also be ruined easily. It works as a primary layer of safety for grease buildup and fire hazard.
So it is essential to take the installation process seriously and install it properly. You will get a user manual with the Litrohub Kitchen Hood. There, you can find an installation manual that will guide you throughout the process. This blog is an extension of the manual and provides more information than the installation. It includes preparation, caution, alternatives, and maintenance of your kitchen hood. This will easily explain mounting, electrical connections, and all the small steps that even a little experienced man can follow. If you follow this, you will not only have a properly functioning kitchen hood that improves the air quality but also give you the pride of completing a successful DIY job.
Tools and Materials You Will Need
Before starting the installation, it’s always a smart approach to prepare all the equipment and materials you will need for the task. Leaving the work halfway to find a tool will be irritating, and this may increase your chance of doing something wrong. Here is the complete checklist–
Screwdriver Set: It is for tightening the screws of the kitchen hood and installing the hood in place.
Electronic drill with Drill bits: It is for making holes for mounting screws for the kitchen hood.
Measuring tape: It will help you measure the distance between the screws and the mounting in the correct height.
Level: It’s to make sure the hood is mounted straight.
Pencil or Marker: It will help you mark the spots to make a hole for the screws.
Sturdy ladder: It will help you to reach the mounting spot easily. Alternatively, you can use a sturdy chair.
Electrical Tape: It’s for securing the connection of the kitchen hood.
Ducting pipe: It’s for venting air outside.
Carbon Filter: If you are venting outside, you will not need a carbon filter. But if you are venting inside, a carbon filter will be required.
Aluminum Duct tape: It will be necessary to seal the duct joints tightly to prevent any leak.
If you have those tools ready, time for the next step.
Safety Precautions Before You Start ( How to install Litrohub kitchen hood?)
Before you start your installation, the equipment and tools are available. You must know and follow some of the safety steps to save your home and your kitchen hood.
Turn off the power supply from the circuit breaker. Turning off the switch is not the safest option. Turning off the circuit breaker is required for your personal safety during the installation.
Always ground the good properly. It’s a crucial step to save yourself from electric shock. Double-check if the hood is connected to ground.
Do not use plastic ducts in any condition. Plastic ducts can be hazardous to health and the environment, and are also prone to melting in high heat.
Maintain a safe distance from the stove top; it should be at least 65-75 cm above the cooking surface. This is required for the effective suctioning function of the machine.
Never vent into attics, garages, or ceilings.
Work with caution to drill into the walls. Make sure there is no water pipe or electrical cable in the wall.
Wear safety gloves and protective gear while working with sharp metal and ducts.
How to Install Litrohub Kitchen Hood? DIY Step-by-Step Installation Process
Please follow the steps carefully.
Step 1: Turn off the circuit breaker for the kitchen hood installation. Do not work with live power.
Step 2: Unpack the kitchen hood from the box and check if all the parts are in the right condition. Remove the protective layer or film if there.
Step 3: Now time to choose your installation method. If you vent outside, set the internal adjuster to “outside” (figure A in Manual)
If you want to go ductless and use a carbon filter to pass the clear air inside, choose the “Indoor” setting. Note that carbon filters are not washable, and you will have to replace them every 3 months.
Step 4: Now decide if you want rear venting or top venting.
If you want to go for rear or horizontal venting, remove 6 rare screws and take off the rear seal plate. Then install the rear square outlet in the kitchen hood.
If you go for top venting, choose the round (Ø150 mm) or square top outlet supplied for your model. Mount it on the top and secure it with screws.
For both methods, remove the round knockout cover in the path you’ll use.
Step 5: Mark the mounting height. Ideally, it should be within 65 to 75 cm from the cooktop. If you have a gas stove, keeping it under 70 cm is standard practice.
Use a pencil or marker to mark the height and positions of the screw holes.
Step 6: Now it’s time for drilling and mounting. If you want to mount it on the wall, use the two preinstalled side brackets. Drill 2 wall holes and insert the iron expansion anchors. Then hang the hood and add screws to set it up.
If you want to mount it under the cabinet, drill 4 holes in the cabinet bottom. Secure the iron expansion anchor or screws. On slim models, attach the one-way valve before mounting if using ducting.
Step 7: Check if the hood is level. Adjust the hood if it’s not straight.
Step 8: Now time to install the venting. Make sure your home duct and hood outlet are the same size. If your home duct is smaller, use a metal reducer. Now install the vent outlet. If you are top venting, attach the round or square outlet with screws. If you are rear venting, remove the rear steel plate and screw in the square outlet.
Step 9: Now connect the duct. Always use rust-proof metal ducting for your kitchen hood. Avoid sharp bends. The metal ducts should not be bent over 90-degree angles.
Step 10: Plug into a grounded outlet with your kitchen hood. If the cord won’t reach the ground, take help from an electrician to extend it.
Step 11: Attach the decorative cover with two M4 screws.
Step 12: Now reinstall the grease filters. For a ductless setting, install the carbon filter behind the grill.
Step 13: Now time to turn off the power and test the kitchen hood. Turn on the circuit breaker. You should see the lights on button A. Try pressing B and E for dual motors and C and D for individual motors. Run briefly on high speed to check leak, noise, and airflow. Try cooking or boiling something. If you have done everything right, it should not cause any issues.
Step 14: For maintenance, clean with mild detergent and warm water every few weeks. Also, clean the grease filter from time to time.
FAQ
Can I use a plastic duct for venting the hood?
No, using plastic vents is one of the common mistakes for DIY kitchen hood projects. Kitchen hoods must contain a rustproof metal duct for venting.
Do I need a carbon filter for this hood?
If you are going ductless, then you will need a carbon filter to clean the air and release it in the kitchen. A carbon filter must be replaced every 3 months or 120 hours.
Warping Up
Installing the Litrohub kitchen hood is more DIY friendly than other kitchen hood brands. However, you need to have a clear idea about what you are doing and how it is done. This article provides a clear guideline for installing your kitchen hood. If you can follow them, you should not have any problem installing your hood. Don’t hesitate to contact us about any installation-related questions.
Read the how to maintain your range hood or best kitchen hood in Canada. To buy the most affordable and efficient range hood please check out Litrohub Affordable range hood.
When you are looking for the best bathroom faucets Ontario, it means you are looking for 3 things combined. First, you are looking for a durable model. Second, you need promising and user-friendly functions. At last, a design that goes well with your bathroom decor.
We are the research team of Litrohub. Our main job this week is to test or experiment with different types of bathroom fixtures from popular brands and give our real-life verdict. So today, we are talking about the best bathroom faucets Ontario.
We will put lights on 6 of the bathroom faucet brands including their top products. After that, you get a buying guide as a bonus.
Thus, without further ado, let’s begin.
Why Trust Our Reviews
The first thing that may come to your mind is why you need to trust things we’re about to say. Or, What our specialties are that you can rely upon.
Our research team consists of experienced sellers, plumbers, DIYers, and homeowners. We combine our experience with bathroom fittings to judge and analyze the qualities of a product.
Apart from that, we always discuss with other experts across the country before talking about a bathroom faucet or anything. Most importantly, we tell only what we learn or understand after using the products.
Nonetheless, we also value the customer reviews regarding the products. So that our statement remains more authentic.
How We Tested Products
Rather than mentioning the top five or six products, we are naming the top 6 brands for bathroom faucets. Each brand has at least 10-15 types of bathroom faucets. So, you can understand that gaining real-life experience with 60-70 products in a short time is impossible.
That’s why we thoroughly researched the local markets first. Then, we figured out which brands earned the most number of pleasing customers. We also noted down the trending products from those brands.
After that, we did some online research again and shortlisted the names of brands and products. Finally, we bought most of them and tested them in different conditions. We also analyzed the brand policies and other related fields to understand more about the sellers.
Best Bathroom Faucets Ontario Reviewed
Here are our top 6 brands for the best bathroom faucets Ontario. You get to know all their good and bad sides here. From these reviews, you’ll be able to understand what’s the right one for your bathroom.
Moen – Quality in Budget
Moen has always been a good brand for high quality products in a reasonable price range. Most of their bathroom faucets come with a strong cartridge valve. Moen cartridges are sometimes considered universal due to their vast usability and compatibility.
Recently, the Moen Idora 84115 bathroom faucet has become the experts’ pick. This product is certified to be efficient. You can get more than 1.2 Gallons of water per minute from this faucet.
Although the main construction features plastic. You will find the handles made of metal. It assures that the handle system won’t fall or break even after millions of twists.
Both the reach and height of the spout are decent enough. The water won’t spill around so easily. The construction seems far better than 84980SRN Wellton, another high-quality model from the same company.
The popular Wellton series also fails to produce a premium outlook like Idora. Wellton has a brushed finish. Whereas Idora has a reflective chrome finish. This style suits well in modern bathroom decor.
But the lightweight Idora requires a bit more maintenance than 84980SRN. The reason is the same, the finish. Moen Idora can be a great addition to your personal bathroom space. The faucet will last more than a decade if used properly.
What We Liked
WaterSense certified
Easy to use handles
Generally weighs less than 1.5 kg despite being double-handled
Durable cartridge
Easy to mount
What We Didn’t Like
Easily gets moisture marks and fingerprints
Key Notes
While focusing on the 84115, we also compared it with a Wellton variant. Both have almost the same valve construction. If you want multiple handles with a better look, go for Idora models. But Wellton single-handle faucets would be great for tons of use daily.
Delta – for Lifetime Use
In search of the best bathroom faucets Ontario, we also found some high-quality bathroom sink faucets from Delta.Delta has a pretty long history of serving consumers with excellent bathroom fittings.
You can rely on Delta showerheads and bathroom faucets, which undergo tons of manual inspection before selling. According to our research, the best delta bathroom faucet is 2538 MPU DST. Delta has used its own Diamond technology here.
The diamond valve can seal the water gateway firmly to prevent any sorts of leakage. Also, you get the required essentials like drain assembly and supply lines with the bathroom faucet.
The price might seem a bit more than Moen or Litrohub faucets. But the accessories and features you get with the products are worth the price range.
For example, if you talk about the supply lines with this Lahara centerset faucet, they are leak-proof and corrosion-free for more than 50,000 uses.
Besides, the size and shape fit almost every bathroom sink. The extra heights seem a plus along with the perfect pex lines. However, you can also buy 35864LF faucet from Delta to save some bucks. This model comes without any accessories. But it has the most anticipated Watersense certificate.
What We Liked
Promising leakage-free performance
Better spout reach
Good material
Simple yet modern look
Versatile use
What We Didn’t Like
Average gasket
Key Notes
Delta faucets are found in mid to high price ranges. Depending on the price, the features and accessories vary. If you spend 40-50 bucks more than the usual mid-range prices, you can find a full package of Delta for your bathroom. The brand’s lifetime warranty will cover most of the normal issues you might face with the purchase.
Grohe – Overall Ideal Choice
No matter what type of bathroom faucets you like, Grohe is always there to provide you with the best options. There are a bunch of new designs and finishes in this year’s Grohe collection.
Among them, Eurosmart Cosmopolitan is our top pick. This single-handle faucet is currently the best choice for bathroom sinks and tubs. The construction is very simple. At first glance, it might look similar to some other shiny faucets. But after use, you’ll know the difference.
The valve firmly controls the water flow for years. You don’t need to move the handle too hard for that. Also, the size of the handle is good for all ages. The Silkmove cartridge technology reduces the possibility of a handle getting stuck so easily.
This type of cartridge is also capable of regulating the water pressure. It won’t break or fall off in huge water pressure too. So, don’t worry about replacing the Grohe cartridge anytime soon.
You can also try a good alternative to Eurosmart, 23085001 Bauloop. Here, the aerator is more angled than the previous one. It lets the spout to cover more area of the basin. Apart from that, most of the features are the same.
Most importantly, the whole faucet remains smooth and functional for a long time. No matter how much you use, the regulatory power of the valve remains like new.
What We Liked
Solid metal construction
Decent weight
Smooth handle
Good basin coverage
Survives tons of use daily
What We Didn’t Like
Comparatively costly option
Key Notes
You can install a Grohe faucet in your living room’s bathroom. This product can withstand rough uses. As you are spending a healthy amount, you need to use it with vessels that are used more frequently. Once you buy it, you’ll forget about replacing it.
American Standards – Best for Designs
There’s no other brand like American Standards with a rich history. With almost 150 years of quality production records, American Standards is the most reliable brand for bathroom fittings.
A key fact about this company is their versatility in products. You get different designs, shapes, and valve systems from this company. So, this one is worth trying for most of the homeowners.
While digging into their products, we found the 1340119.002 Pillar Tap Metering Faucet to be their top product. It’s your everyday low-profile faucet. It has great control over the water flow. If you have kids, try this to save water when they’re playing with the tap.
Nonetheless, you can also try their double-handle faucets, like 7186201.002 Fluent faucet. This product also comes with a brass construction.
You should know that most of the American Standard bathroom fixtures come with durable metal bodies. So, it’s a tough job to break the faucets so easily.
The reach of the spouts depends on what type of faucet you’re buying. It’s sure that the reach of every spout ensures no spill and waste of water in sinks. The angling of the aerators is engineered well too.
What We Liked
Versatility in design and construction
Different price ranges
High-quality metals
Great seller history
Pleasing after-sales services
What We Didn’t Like
High arch and double handle faucets are a bit heavy
Key Notes
When you are too confused about what to buy, the simple solution is to visit the American Standards store and pick one suitable for your sink.It is a global brand that doesn’t run out of stock. So,it’s rare for someone not to be able to find the right faucet for their home.
Kohler – for Luxury Bathroom Fixtures
Without a doubt, Kohler is the best brand for having exclusive bathroom fittings. From faucets to bathroom lights, everything from Kohler leaves a rich vibe in your space. Their products don’t come cheap. You have to spend a hefty budget to decorate your bathroom or shower with Kohler fixtures.
A real surprising fact that most of us are unaware of is this brand also offers sustainability. They got several certifications and approvals from global authorities. In WasteLab, recycles metals and other components to make quality items.
Testing several Kohler faucets was out of the question. Because of the price obviously. Still, we got our hands on K 596. You can use it on both kitchen and bathroom vessels. The design suits any bathroom decor.
The handle has a decent sensitivity. You can see the difference in water flow by the slightest handle shift. Such a smooth handle function is also seen in the 98827-4-CP Kumin faucet.
It’s not just the design, but the core is also better than several brands. Most of the Kohler faucets contain ceramic disc valves. It is another reason why the products cost too much.
Ceramic disks resist corrosion for more than a couple of decades. Despite being so durable, several products come with a lifetime warranty coverage.
What We Liked
Luxurious designs
Eco-friendly brand
Best type of valves
Durable finishes
Decent warranty policy
What We Didn’t Like
No regular or budget-friendly pricing from the brand
Key Notes
The price you spend to buy a Kohler faucet can let you buy at least 2 Delta or Moen faucets. But it’s obvious because the brand doesn’t offer any ordinary deals. The faucets are high-class, by all means. It’s best to pick Kohler fixtures for the bathroom attached to your bedroom.
Litrohub – the Rising Name
Litrohub is a Canadian brand for hardware solutions. They offer quality Kitchen, Bathroom, and lighting products that excel in elegance, simplicity, and beauty. The brand started its journey not long ago. Even so, the name has earned quite a reputation for selling quality products to their customers.
If you ask why we are putting our faith in a new name like Litrohub, it’s because of the effort. New brands and sellers always try to keep the commitment to stand tall among several other existing brands.
As Litrohub is starting to make their position, they’ll definitely give you the perfect bathroom faucet at a reasonable price. Litrohub bathroom faucets come in 4 different colors or finishes. The shape and design are the same.
This faucet is also tested during production. The water pressure regulation from the valve is accurate. Here, the simple handle construction is sensitive enough to give you the required water flow.
The company’s faucets can offer you 1.5 GPM or above. Which is also more than several Moen bathroom faucets.
The bonus part is you get to return the product within 30 days of purchase if you’re not satisfied with the features.
What We Liked
Brand success in a very short time
Simple and easy-to-install faucets
Great after-sale services
Elegant finishes
Reasonable pricing
What We Didn’t Like
Not too much variety like other brands
Key Notes
As it is a local brand in Toronto, they are focused on creating local establishments through their quality product. The company is eager to grow its business and generate more repetitive customers. Thus, you can gamble and place your order from their site right now.
Best Bathroom Faucet: Buying Guide
Now, let’s talk a bit about the facts you need to consider while buying the best bathroom faucets in Ontario.
Sink or Tub Requirements
First things first, you need to check what type of faucets fit on your basin or sink. It doesn’t matter even if you buy the best faucets Ontario if it doesn’t fit well on the vessel or deck.
Material
There are two types of material in the market; plastic and metal. Plastic materials are budget-friendly. But they won’t last long like metal ones. Still, there are some plastic bathroom faucets from reputed brands that might work better.
However, we suggest buying metal faucets. Especially stainless steel, zinc alloy, brass, and nickel. Among them, brass is super durable. It also costs a bit extra.
Valve
The cartridge valve system is a good choice for both performance and budget. Also, this type of core is easy to install. The cartridge system requires fewer parts and accessories.
However, the most durable option is a ceramic disc valve. They last for around 2-3 decades. But the catch is ceramic valves cost more than a stem or cartridge.
Color & Finish
The best type of color and finish depends on the interior of your bathroom. You need to make sure the new faucet color matches with the existing fixtures. The finish shouldn’t stand out. Instead, it should get mixed with the bathroom decor and enhance the scenario.
Recently, chrome finishes have become more popular. But some DIYers also refer to a matte finish with black or bronze color for less standout.
Spout Type and Height
There are different types of spout shapes. Such as swivel, gooseneck, arch, low profile, etc.
The shape also determines the reach of the aerator. Generally, gooseneck or arch spouts should be 6-10 inches high from the bottom of the sink. But low profile options are better when the height is just above 4 inches.
Handle Design
The handles of a faucet make the outlook, performance, and durability.
Whether you buy the knob or lever, you need to make sure the handle is neither hypersensitive nor stiff. It should be smooth and moderately sensitive.
Certifications
The most important label you need to check while buying the bathroom faucet is the WaterSense certificate. This tag ensures the product you’re buying is efficient and saves water.
Apart from that, there are some other certificates proving the quality or performance. But the more certified the product is, the less chance of it being budget-friendly.
Warranty
A faucet from any brand should come with at least a 2-year warranty period. However, most renowned brands are offering limited lifetime warranties with most of their bathroom fixtures. Very few brands like LitroHub are also offering an easy return policy if the purchase isn’t right.
Pricing
Any decent bathroom faucet, whether single or double-handled, costs more than 100 canadian dollars. But the ideal price range is always below 180 dollars. The only difference is luxury or exclusive fittings. They can cost twice or thrice.
FAQ
How long do faucets last?
The optimal performance of a bathroom faucet can last for 10-12 years. After that, it starts to degrade the performance. After 20 years or so, you must replace the faucet.
What brand of faucets do plumbers recommend?
Plumbers mostly recommend Moen, Delta, and Grohe. Because these brands offer all the basic features in a good price range. Also, they are quite durable. Recent days, Lirohub is a good name as well.
What is the most popular bathroom faucet finishing?
The most popular bathroom finish is chrome. After that, matte and satin come in the list. Some plastic faucets also come with a fake metallic finish.
Which bathroom faucet lasts the longest?
Brass faucets with ceramic disc valves last longer than any other type of faucets in the market. After that, you can consider stainless steel constructions with cartridge valves.
Are more expensive faucets better?
It’s not always like this. We agree that quality fixtures can cost you a little more. But that doesn’t mean faucets priced sky-high are the best. The term, better or best depends on your demands in performance and outlook.
Our Verdict : Best Bathroom Faucets Ontario
We hope today’s discussion helped you make a decision. There are nearly a hundred local and global brands of bathroom faucets. Among them, we narrowed down your search to six brands only. It should help you to find the right model easier than ever.
We will not ask you to buy Litrohub directly as our recommendation is a little biased here! However, if you also intend to change your kitchen faucet along with bathroom fixtures, then read this article.
Installing a kitchen faucet is not that hard to hire a plumber forit.But not easy enough to DIY effortlessly. But with proper guidance, anyone with basic skills should do it.
So, let’s do a deal. I will take a few minutes from you, and you will get the step-by-step process on how to install kitchen faucet.Seems fine? Deal done then.
In Litro Hub, we offer quality Kitchen, Bathroom, and lighting solutions that excel in elegance, simplicity, and beauty. Today, we will share our detailed guide about installing kitchen faucets.
Let’s jump right into the article.
Is it hard to install a kitchen faucet yourself?
As you are already reading an article about how to replace kitchen faucets, I assume you have decent experience in fixing regular household problems. With a little experience and some basic tools, it is not hard. But sometimes it can cause some challenges that may make the situation challenging.
For instance, if your old faucet is too old and rusty, you may find it difficult to remove it.A broken water turnoff valve or leakage can create messy situations. However, those are kind of rare. So, don’t let those stop you.
Keep reading to learn how to change your kitchen faucet.
How to install kitchen faucet : 7 steps guide
First thing first, choose a weekend or holiday morning to replace your old kitchen faucet. Don’t pick odd times like the middle of the night. Why? If any issue arises, you can simply call your nearby plumber to handle the situation.
We will break down the steps into small but detailed steps.
Let’s start-
Step 1: Preparation and Tools.
An adjustable wrench, plumber putty, putty knife, and Teflon tapes are the basic tools for installing your kitchen faucet. A water bucket, safety goggles, and kitchen aprons can come in handy. While installed under the sink, the apron can protect you from dirt and stains.
You may also keep some cleaning tools such as a scrubber, general-purpose cleaner, and a microfiber cloth. Those items will come in handy before installing your new faucet.
We recommend having a helping hand for kitchen faucet installation (no kids please). Someone who can hand over your tools, hold stuff and check if you are doing it correctly.
First, turn off the water shutoff valves under the sink. Turn on the old faucet and check if the valve is stopping water properly. When you are sure, you can start removing your kitchen faucet.
Disconnect the supply line using the wrench. Make sure to hold the pipe with the other hand while using the wrench.
Remove both the hot and cold water lines. Make sure to mark or remember the hot and cold water supply lines. You can take a picture if you have doubts in mind.
Keep a bucket under the line so any water inside the pipeline can fall into the bucket.
Step 3: Remove the faucet
Now it’s time to remove the old faucet. Look under the sink. The faucet should be attached with a mounting nut to the sink. Depending on your faucet type, there can be one to four parts set in different holes in your sink.
Adjust your wrench with the nuts and remove them. Some Kitchen faucets don’t have any nuts. They have twistable parts that you can remove by twisting.
Now stand up and pull out the faucet. You may have to apply a bit of pressure to pull that thing up from the hole. If the faucet is stuck, the plumber may be causing it. Use a putty knife to remove the putty and try again.
Step 3: Cleaning
Once you remove the sink faucet, you can expect to see stains, dirt, and old putty. Remove the plumbers putty with a putty knife. Then spray a cleaning agent and scrub with a scrubber or brush. Don’t have a cleaning agent? Apply vinegar and baking soda on the spot and wait five minutes. Then rinse the kitchen sink with water.
Step 4: Installing new Faucet
Now, time to install your new faucet. Keep in mind that you need to get a faucet that fits the number of holes in your sink. For installation, you should get a manufacturer’s guide with your kitchen faucet. Go through the guide to get more specific steps.
First, let the pipes attached to the faucet go through the dedicated holes. Once you set the faucet in the proper position, attach the nuts or mounting hardware under the sink. Use the wrench to tighten the nuts or hardware under the sink.
Step 5: Attach the water supply lines
Find the cold water line and hot water line. Wrap Teflon tapes around the attachment part of the water pipes. Then attach the pipes on the correct lines. Check the photo if needed. Carefully tighten the nuts of the pipes. Make sure not to apply too much pressure while tightening. It may break the line.
Step 6: Check for leaks
Once you attach all the parts and connect the water lines, open the shutoff valve. Carefully observe if any water is leaking. Sometimes water leakage is hard to observe immediately. Leave the sink for thirty minutes or so, then check again for leaks. Use all the functions of the faucet and make sure everything is working properly. If you notice any leak, you just need to close the shutoff valve and tighten the water line nuts.
Step 7: Last step
Remove the aerator or spray hose from your faucet and turn on the water. Let the water run for a few minutes so the water pressure can remove any dirt and debris from the line. After that reattach the aerator and enjoy your new kitchen faucet!
Frequently Asked Questions
How to tighten the kitchen faucet?
If your kitchen faucet is leaking, tightening the lines can easily fix it. First, close the shutoff valve and remove the nut. Remove the old Teflon tape and wrap the new one. Reattach the pipe and tighten it with a wrench. This should fix the leaking problem.
Do you need a plumber to change a kitchen faucet?
You can hire a plumber to change a kitchen faucet. But you can also do it yourself with basic skills and tools. It will help you save at least 100$.
Installing a kitchen faucet can be overwhelming at first. But with proper information and tools, there are very few things that can go wrong. Just follow the steps, get help from the manufacturer’s guide and everything should be on the right track.
A kitchen without faucets is just a keyboard without backspace! Can you imagine a cooking space without kitchen faucets?
Most of the water we use every day goes through our kitchen sink. The faucets are the unsung heroes behind every delicious dish you prepare.
No matter what you do, wherever you go, you can’t ignore its blessings. You will need to wash your hands, clean the veggies, use water while cooking, and do the dishes for the rest of your life. After every few years, you may need to change its parts, fix leaks, replace, or install a new one. The interaction with the kitchen faucet is unavoidable.
As you will be using it every day multiple times, even a simple feature of a kitchen faucet will make your life a lot easier.
The knowledge of different types of faucets, their parts, benefits, and DIY guides can come in handy anytime!
We are the content team of Litrohub, a group of professionals on home appliances. We will be sharing guides about kitchen faucets in this article.
Sit tight and keep reading!
Kitchen faucet and where it came from
Kitchen faucets have been around since ancient times. In 1700 BC, spring water was used to supply water to private houses. Romans used the river and spring water to provide a continuous water supply in thousands of homes and bathrooms.
The modern faucets were invented in the eighteen centuries. Faucets of that time had two handles for warm and cold water.
During the Industrial Revolution, the necessity and availability of various materials led to the invention of different types of faucets. From the early 20th century to the present time, brass has been one of the most popular materials for faucets.
Parts of kitchen faucet
What if a part of your kitchen faucet gets broken but you do not know its name? You could have easily bought the part online and fixed it DIY. But when you don’t know, you are more likely to hire a plumber, which is costly.
To stop that, let’s go through the common parts of kitchen faucets.
Aerator: If you unscrew your faucet head, you will see a disk with tiny holes in it. It’s called the aerator. The aerator mixes air with water and creates a consistently desirable flow of water. It can also work as a filter. The aerator also minimizes the waste of water.
Faucet handles: Faucet handles are the liver that is used to turn on, off, and control the faucet.
Spray hose: Spray hose is an extended part of the kitchen faucet. It provides moderately pressured water for easy cleaning.
Valve: A valve is a cartridge-like part of a faucet that controls the water temperature and flow. If you notice issues in water flow or temperature. It may indicate a bad valve.
Deck plate: A deck plate is the plate on which the faucet is mounted. It also works to cover the extra holes of a sink. Not all the faucets have a deck plate.
Body: The faucet body is the main functional part of a faucet. You can pull out the body for convenience for some types of faucets.
Gasket: Gaskets are the parts that make your faucet leak proof in the joints. It can be made of rubber or metal.
Washer: It is a ring-like part that also works to make the system waterproof in some joints. It’s made of rubber, metal, or both. The aerator usually contains a washer.
Materials of Kitchen Faucet
There are several different types of faucets based on the material. The material of a kitchen faucet makes the biggest difference in price and quality. Let’s learn about them.
Brass kitchen faucet: Brass kitchen faucet is the most common and convenient. Brass is made of copper and zinc, which makes it water-resistant and long-lasting. Brass kitchen faucets are stylish and often coated with modern color. It’s also cheaper than some other popular options.
Chrome Kitchen faucet: The chrome kitchen faucet is made of metal which is coated with chromium. Chrome faucets have a rich metallic color. It’s convenient and easy to clean and maintain. It is a bit more prone to scratches and watermarks.
Stainless steel faucet: Among all types of faucets, stainless steel faucets are the most durable and long-lasting. It’s resistant to scratch but prone to getting a watermark if not wiped out. Stainless steel kitchen faucets are a bit pricey.
Bronze: Bronze faucets are quite aesthetic and have an antique-like character. It will sync perfectly with the proper kitchen design. Bronze kitchen sink faucets are expensive and they require extra maintenance.
Coated: Kitchen faucets of different materials can be coated for colors, longevity, and style. Paint, plastic, and rubber can be used to cover the faucet body.
Types of Kitchen faucets
There are about a dozen types of faucets in the market with different styles and features. But we assure you that choosing one will not be hard. ( we promise) Before jumping into the types let’s finish some necessary discussions.
Firstly, there are 2 types of kitchen faucets based on the mounting place. If the faucet is built to mount in the sink, it is a sink mounting faucet.
If the faucet is designed to be mounted on a wall, it will be a wall-mounting faucet. We can easily expect most of our readers to be looking for sink mounting sink information. Because that’s a lot more common than the wall-mount faucets.
Secondly, there can be faucet types based on the number of holes. There can be one to three required holes for different types of faucets. However, if you want an extra soap dispenser and water sprayer, the number of holes can increase.
If you choose the easy way, buy the faucet that matches your sinkhole. However, if you have 3 holes in your sink and choose a hole faucet, that is also possible with a plate that covers the extra holes. You may also get a deck plate with single-hole faucets.
Now let’s dive into the main kitchen sink type you were waiting for.
Pull down faucet
Pull-down faucets are the most common. As the name suggests, you can pull down the faucet head and wash things with more ease. When done washing, just leave the head, it will fit in the place itself.
2. Pull out faucet
Pull-out and pull-down of the faucet may create some confusion. But they do exactly as their names. Pull down only comes down, while pull out can be pulled out and moved 360 degrees. They add flexibility and easy cleaning features to your kitchen sink.
3. Single handle faucet
Single-handle faucets have only one handle to control the water flow and the temperature of the water. By pulling the handle up and down you can turn off and on the faucet. The amount of up and down controls the water pressure.
Turning the handle left and right will help you control the water temperature. You may experience a bit of difficulty getting your desired temperature.
4. Double handle faucet
Double-handle faucets have two handles. One for cold water and the other for hot water. Most times the handles stay a few inches away from the faucet. But some faucets may have both handles attached to the faucet body.
5. Commercial faucets
Commercial kitchen faucets are quite higher than regular kitchen faucets. This is because commercial spaces may require washing and filling larger appliances. Commercial kitchen faucets are also very powerful to enhance the ease of working with large dishes.
6. Separate spray kitchen faucet
You may sometimes need both a stable water source and a moveable water source. This is where separate spray kitchen faucets will come in handy. But for this, you will need one extra hole in your sink.
7. Pot filler faucet
Pot filler faucets are wall-mounted faucets without any sink. The faucet is used to fill up the pot easily while cooking. Some of the pot filler faucets are moveable.
8. Motion detection faucet
Motion detection faucets are a really smart and modern kitchen solution. It is also called touchless kitchen faucet. If you are among the people who do not feel right to touch the handle after washing hands, motion detection faucets were made just for you. Touch faucets also minimize the wastage of water.
Popular color of kitchen faucet
There is no shortage of color variations when choosing kitchen faucets. Just look at the variations of brass colors– shiny brass, matt brass, antique brass, golden brass, polished brass, it goes on and on. Brands have many color options to choose from.
But in 2024, people are getting a bit lazy to choose from all those! That’s why black is the most trendy color of kitchen faucets today. Chrome and satin are also the standard and popular colors for kitchen faucets.
But when it comes to choosing a color, just trust your taste and consider the surroundings of your kitchen. ( Kitchen interior)
Choosing the best kitchen faucet for you
Now you know all the colors, types, and materials of kitchen faucets. It’s time to find the best kitchen faucet for you.
To choose the one that fits you, you need to consider three things. Style, features, and installation type.
Installation type should be considered first when you are looking for a kitchen faucet. Count the number of holes you have in your sink. If there are 3 holes, you should look for a three-hole faucet. You can reduce the number of holes with a deck plate. It helps reduce the hole number. If you want to increase the hole number, contact a plumber for the job.
Now features. The feature of your kitchen sink depends more on you. The feature you feel is the right one for you (can’t go wrong). The second factor that will help you choose a faucet is your need.
If you do a lot of washing, pull-down or pull-out faucets will work best. Need a more accurate temperature? Get a good branded double-handle faucet. A separate spray faucet will come in handy when you need multiple water sources. There are other factors you may need to consider. If you have pets and babies, you should keep that fact in mind.
The third factor in choosing the kitchen faucet is style and color. Your new faucet should match your kitchen’s current style. If it is modern, get a modern-looking faucet. For a classic, commercial, and antique-looking kitchen, choose accordingly. There should be no shortage of style in the market.
How to remove an old kitchen faucet
Removing old kitchen faucets may seem quite hard. But with the help of some basic tools and guidance, anyone can do it. We have dedicated content for removing and installing kitchen faucets. I’m sure that guide will be enough to solve any issue with replacing your kitchen faucet.
How to install a kitchen faucet? Should you DIY?
Installing a kitchen faucet yourself can help you save some money. But doing it wrong may lead to unwanted consequences. However, by following a step-by-step process, you can do it flawlessly. Check our ultimate guide about installing kitchen faucets.
How to unclog a kitchen faucet
You and I can take a day off or two, but a kitchen faucet can not. It has to work 365. Continuous usage can create clogs and jams inside the kitchen faucet. Sometimes removing the parts and scrubbing with a brush can solve the issue.
Other times, you may need to use some homemade cleaners to unclog and clean your kitchen faucet. Check out our detailed guide explaining all the cleaning solutions for kitchen faucets.
General problems and fixes
Check out the common problems of kitchen faucets and their fixes-
Loud Faucet
If you hear loud noises from your kitchen faucet, the washer may be displaced or damaged. Changing the washer can solve the issue.
Lack of water pressure
Water pressure problems are common. Especially if the supply of water is not that good in quality. Dirt and debris can easily accumulate in the aerator and cause such problems. Cleaning the aerator is an easy fix for the problem.
Leaking faucet
What can be more irritating than having a leaking faucet? It wastes water and increases your bills for no reason. A bad washer or gasket can cause the problem.
No water
If the water is not coming from your faucet, the valve may be broken. Get a new valve and replace it to fix it.
Tight handle
Dirt, rust, and debris can make your faucet handle tight. Cleaning and applying silicone-based oil can solve the problem.
Care and maintenance of kitchen faucet
Care and maintenance of kitchen faucets can vary slightly depending on the material. In general, it does not require much effort. There are three basic steps for maintaining your faucet
Clean the faucet with a damp cloth and keep it dry every day.
Cleaning the inside parts of the faucet once or twice a year (especially if you have hard water)
Cleaning and replacing the aerator when needed.
If you are more interested in the maintenance of kitchen faucets, check out our kitchen faucet maintenance guide.
Litrohubs kitchen faucet
Looking for a modern kitchen faucet in Ontario? Litrohub presents North American Standard kitchen faucets for smart home spaces. We have 3 options– Chrome, Matt black, and satin with minimalist designs and elegant style.
Our black kitchen faucet can fit in any kitchen space seamlessly. While chrome and satin may require a bit of matching with the surroundings. For buying kitchen faucets in Canada, check out Litrohub’s premium kitchen faucet collection.
Conclusion
Until something gets wrong, we don’t really understand the importance of kitchen faucets. Just a bit of maintenance is enough to keep your kitchen faucet in good shape. Plus, most issues with faucets are not that complex and DIYable. Upgrading your kitchen faucet can improve comfort a lot with a little effort.
Are you looking for a new bathroom faucet? But don’t know much about bathroom sink faucets? Well, nothing to worry about.
In this article, we’re telling you all about bathroom faucets, their types, builds, materials, etc. The intention of writing all this info together is to let you have proper knowledge about bathroom faucets. So that you can buy a new one on your own rather than relying on the seller.
Let’s start.
What is a Bathroom Faucet?
A bathroom faucet is a hardware or device that controls water from the main line to the basin or tub. The main job of a bathroom sink faucet is to regulate the speed, flow, temperature, etc. of water. Some faucets can even filtrate water.
Some local people also call faucets taps as the function seems almost the same.
Bathroom faucets are mounted on floors, walls, and tubs. But the wall-mounted faucets generally work as a part of the shower head-tub combo. So, some people put this type in the shower faucet category.
We can say that any faucet working well with bathroom sinks or tubs is called a bathroom faucet. They can have different shapes, handles, sizes, and materials.
Bathroom sink faucets aren’t only essentials anymore. They work to enhance the interior of a bathroom. There are several options in the market only for bathroom styling. These are considered very rich and premium models. A faucet with the proper shape, color, and finish can change the total outlook.
Classifications of Modern Faucets
Depending on where you are using it, there are three types of faucets or spouts.
Shower Faucet
Shower faucets are mounted on walls. Just below the showerheads. Shower faucets sometimes control the water flow from the showerhead. These are actually a part of shower head systems. Most of the time, shower sets are sold with faucets.
These days, shower faucets can have two handles, one for cold water and another for hot. There can also be a third handle if the showerhead and bathtub are connected with a single water line. The third handle will help to change the flow direction from the tub to the showerhead and vice versa.
Kitchen Faucet
Kitchen faucets are suitable for cleaning jobs in the kitchen or dining space. This type of faucet comes in different heights and shapes.
Nowadays, the kitchen faucets have taller spouts. The style helps in convenient washing and cleaning. The handles of tall kitchen faucets are mounted at the bottom mostly.
Another interesting thing is some faucet spouts are removable. It lets you clean every corner of the vessel or sink.
Bathroom Sink Faucet
By the name, you might’ve already understood what it is and how it works. Bathroom faucets are installed with bathtubs, sinks, and basins in the bathroom. You’d find several mounting options in bathroom faucets.
Moreover, bathroom faucets have more varieties than any other types of faucets in the matter of size, color, and number of handles. You’ll know more about this stuff later on in this discussion.
Basic Construction of Bathroom Faucets
A bathroom faucet construction is almost the same as other kitchen and sink faucets. Yet, to help you understand every single word we say further, here’s a short note.
Aerator
The aerator is the net you will find at the tip of your faucet. The net can be either metal or plastic. An aerator’s job is to create fine dramas with the water. But some aerators are capable of blocking debris coming out with water.
Valve
There are two types of valves. One is a washer compression faucet and the other is a non-washer. Washer compression ones have cores known as stems that rely on water pressure solely to work. But non-compression ones like cartridge, ball, and disk valves move sideways to make a path for the flow.
Mounting
Wall mount, floor mount, and deck mount are the three major types. Among them, deck mount faucets are more suitable and common.
Handles
Every year, new types of faucet handles are innovated. Till now,we’ve found these ones to be common in every place:
Bar handle
Knob
Cross
Joystick
Lever
Push button
Lever, bar, and knob handles are often seen in usual bathrooms. But the cross, joystick, push button, etc. are good for modern-style bathrooms.
Spout
By spouts, we mean the main pipe or body. Spout and knob are the two main things that create the outlook of a faucet. The curve, angle, and height of the spouts also determine how well the water will come out. There are 4-5 types of spouts. We’ve talked about them below.
Other Parts
There are also other parts like O-ring, baseplate, etc. You can easily understand what their jobs are by seeing them once.
16 Different Bathroom Faucet Types
Now, let’s tell you about the primary types of faucets for bathrooms or laundry. We have categorized them based on the mounting style mainly. Because most shops also classify them in this way.
We will talk about other types right after finishing this part.
Deck Mount Faucet
The faucets you need to install on the top of the basin or tub are deck-mount faucets. Almost every other faucet you see is deck mounts.
Single Handle Faucet
Among deck mount faucets, the ones with only one handle or lever fall in this category. Nowadays, most single-handle faucets have cartridge valve construction.
Center Fit Faucet
Basins or tubs with three holes for faucet mount require center fit faucets. A center fit faucet set comes with one spout and two handles. After mounting, the distance between two handles remains 4-6 inches.
Widespread Faucet
It is a sub-type of center fit. The only difference is the distance between two handles is more than 8 inches. Widespread faucets are good for larger tubs and sinks.
Vessel Faucet
Vessel faucets are totally a different type. Both the vessel and the faucet are installed separately on the countertop. You can see vessel faucets and basins in high-class hotels and restaurants. The aesthetics of this faucet is on trend.
Wall Mount
Wall mounted faucets almost look like shower faucets. They are mounted on walls right behind the sink. Users think using wall mount faucets is convenient. It keeps the top of the sink spacey to clean. But installing a set of wall mounted faucets can be tricky.
You can also categorize bathroom faucets depending on the valve constructions. Plumbers, DIYers, and other experts differentiate by valve or inner construction.
Ball Faucet
The valve inside here is a hollowed ball with a required number of holes. It’s an old-style construction. But still, it’s on demand due to its cost-effectiveness. Ball faucets only have a single handle mounted on top of the spout. As the model is old-fashioned, there are many flaws in the construction. Such as leakage, corrosion, etc.
Cartridge Faucet
Currently, cartridge faucets are not hype. The main reason is easy installation. Inside the cartridge valve faucet, there’s barely any complex components. Cartridge has a simple housing. It controls water flow and mixes water for regulating temperature. Cartridge faucets are also single handle constructions. Double-handle faucets can have two separate cartridges.
Stem Faucet
Many say stem and cartridge are the same. But stem works differently. The vertical tension or compression created while moving the knob makes a stem active. While cartridge rotates and aligned water holes for waterflow. Another name of the stem faucet is the compression faucet. Because the stem relies on water pressure to be active.
Disc Faucet
Disk valve faucets are more common in places where several people gather. For example, office restrooms, restaurant toilets, etc. The two disks inside the valve area move to mix and direct water from the spout. This type is a long-lasting option. But it also costs you extra money.
Not just valves, the shape and length of faucets also create some famous types of bathroom faucets. Here are some of them:
Standard Low Spout Faucet
Here, the spout remains at 90-degree angle with the mounting. The spout stays very close to the basin. It’s good for congested areas.
Gooseneck Faucet
Gooseneck faucets are curved like the neck of swans. It’s a good choice for styling bathrooms and sinks. Gooseneck spouts give you enough space in the vessel.
Arch Faucet
Arch faucet is also like gooseneck. But it has an U-shaped curve with two 90-degree folds in the spout body. Arch or U spouts pout water right at the middle of the basin.
Waterfall Faucet
Waterfall faucets don’t have any aerators installed. They create drama similar to real waterfalls. This type of faucet is very expensive.
Swivel Faucet
The swivel faucet is also a low-profile style. But the spout is straight and angled. The top of the soap rises higher here.
Pullout Faucet
This type of spout is extendable. You can detach the mouth from the main body and reach every corner of the vessel with the mouth.
Apart from all those, you can also find some other types of bathroom faucets. Such as:
Bridge faucet
Touchless faucet
What are the Best Materials for Bathroom Faucets?
Here’s a list of top materials used to make bathroom and shower faucets.
Stainless Steel
Brass
Plastic
Zinc
Nickel
Stainless steel is a very popular option. SS faucets can last more than 3 decades if used properly. But the material is a bit costly.
Brass is the most expensive and durable material for making bathroom items. Some brass products can even last longer than SS. However, they require high maintenance.
Plastic is the latest material. It is very cheap and easy to mount. However, their construction breaks easily.
People go for zinc or zinc alloy when the budget is tight but the requirement is metal faucets. Zinc often comes with corrosion issues.
Nickel, on the other hand, is a great deal. It comes with various finishes. The price is okay. It can also last a couple of decades.
Bathroom Sink Faucet Finishes & Colors
The bathroom is where you refresh your body and mind. So, the outlook of bathroom accessories must be nice and catchy.
Let’s tell you about the colors and finishes you need to focus on while buying a bathroom faucet.
Popular Faucet Colors
Black
Silver
Bronze
Gold
Brass
Gold
Elegant Faucet Finishes
Chrome
Polished
Brushed
Matte
Satin
Oil rubbed
Bathroom Faucet Buying Guide
If you’re in a situation where replacing your old bathroom faucet becomes a must. Consider these things first.
Things to Consider Before Buying
Observe the interior of your bathroom well. The new faucet should match properly.
See the size and number of holes in your sink.
Measure the space of the countertop of your sink or tub. It will help to determine the right height for the faucet.
Consider how much the faucet will be used daily.
Things to Consider While Buying
Go for the cartridge faucets. But if you intend to use the faucet heavily, the disc valve will work better.
Check for the WaterSense Label.
Match the color and finish with existing components in the bathroom. If you’re still confused, go for a silver or chrome finish, it’s universal.
The best choice is to buy a stainless steel build. But go for plastic if you don’t have the budget and tend to use the faucet less.
Check for accessories like brass plates, sink drainage caps, etc.
Choose the handle according to your hand’s comfort.
When to Buy a New Bathroom Faucet?
If you’re facing any issues with your old faucet, that doesn’t mean you have to change it immediately. You can repair or troubleshoot them to use for a few more years. However, there are some times when replacing your old faucet becomes mandatory. Those moments are:
When the valve is totally worn out or damaged
The handle is constantly coming loose
The faucet is leaking even after repair
Inner components are corroded
The faucet has lost its color and finish completely
Can I Change the Bathroom Faucet on My Own?
It depends. If you’re experienced enough, you can even install complex devices like disc valve faucets. But for an amateur, plumbing work can be a hefty job.
The interesting thing is you can install a cartridge faucet by yourself quite easily. This type of faucet has fewer components and a very simple housing.
Things to Consider
If you know where the main valve of your home’s water line is, you can easily turn it off and start replacing old faucets
You need to know the compatibility of your main water lines. Depending on that, you need to make a blueprint of your work
Some replacement work requires more than one person. So, you should seek help from someone skilled if you can’t do it yourself.
Tools Requires
Plumbers’ tape
Wrenches of different sizes
Screwdriver
Allen keys
Hand saw
Sealant
How to Replace a Bathroom Faucet?
Replacing bathroom faucets is done in two steps. First, you need to remove the old faucet without leaving anything. Second, you need to install the new one accordingly.
Now, remove the nuts and separate the lines of water from the faucet
Next, unscrew the bolts holding the faucet
Finally, remove the old faucet carefully without damaging the sink
How to Install Faucet Bathroom
After removing the old faucet, clean the mounting area
Place the new faucet precisely
Tighten the nuts at the bottom
Now, connect the lines with the faucet
Use tapes to tighten if necessary
At last, turn on the main line and check if there’s any leak
Key Notes
Make sure you don’t put any scratches while using wrenches
Before installing the new faucet, you can clean the debris and deposits inside the faucet line
How to Fix a Leaking Bathroom Faucet?
Leakage is a common problem among older faucets. Worn-out cartridge or valve can’t handle the water pressure properly.
Apart, if you install the new faucet the wrong way, it will start leaking. You also need to check the water pressure in your home. If it’s more than 50-60 PSI, any water outlets might leak. You can learn more about all the troubleshoots of faulty bathroom faucets in another article.
We cant hold ourselves to introduce LitroHub bathroom faucet. Why is it unique? In a sentence, It is Efficient, Eco-Friendly, & Elegant!
FAQ
Can you put a kitchen faucet in the bathroom?
You can put a kitchen faucet in the bathroom if the mounting option matches. But you should try to use bathroom faucets with your bathroom sink or vessel.
Do bathroom faucets come with drain assembly?
Some bathroom faucets come with drain assembly. They are actually bathroom sink or tub sets. They price more than bare faucets.
How high should the faucet be above the bathroom sink?
The height of the bathroom faucet shouldn’t be more than 6 inches. Too high or low can spill water outside the sink.
Why does my bathroom faucet smell like rotten eggs?
Your bathroom faucet can smell like rotten eggs if bacteria is growing rapidly. You need to clean the pipes and drains to remove the smell.
Can I paint my bathroom faucet?
You can paint your bathroom faucets using paints for metallic surfaces. Read the label of the paint before applying.
Summary
Bathroom faucets don’t come with any extra noticeable features. They are built to comply with the bathroom interiors and other components.
Long story short, there are tons of different types of bathroom faucets out there. To find the best ones, you need to know the requirements and compatibility of your sink or tub first.
We hope this article was able to guide you to the best bathroom faucet you were looking for.
