This is a simple guide how to install Litrohub Kitchen hood? Installing a kitchen hood DIY may feel overwhelming at first, but it doesn’t have to be complicated. With a few basic tools and proper knowledge, you can easily do it yourself.
A kitchen hood is a basic necessity in modern homes. Cooking releases smoke, grease, steam, and odor that can cause multiple problems if not ventilated well. The smoke, grease, and steam can attach to the kitchen wall and make it greasy and dirty. The air quality of your house can also be ruined easily. It works as a primary layer of safety for grease buildup and fire hazard.
So it is essential to take the installation process seriously and install it properly. You will get a user manual with the Litrohub Kitchen Hood. There, you can find an installation manual that will guide you throughout the process. This blog is an extension of the manual and provides more information than the installation. It includes preparation, caution, alternatives, and maintenance of your kitchen hood. This will easily explain mounting, electrical connections, and all the small steps that even a little experienced man can follow. If you follow this, you will not only have a properly functioning kitchen hood that improves the air quality but also give you the pride of completing a successful DIY job.
Tools and Materials You Will Need
Before starting the installation, it’s always a smart approach to prepare all the equipment and materials you will need for the task. Leaving the work halfway to find a tool will be irritating, and this may increase your chance of doing something wrong. Here is the complete checklist–
Screwdriver Set: It is for tightening the screws of the kitchen hood and installing the hood in place.
Electronic drill with Drill bits: It is for making holes for mounting screws for the kitchen hood.
Measuring tape: It will help you measure the distance between the screws and the mounting in the correct height.
Level: It’s to make sure the hood is mounted straight.
Pencil or Marker: It will help you mark the spots to make a hole for the screws.
Sturdy ladder: It will help you to reach the mounting spot easily. Alternatively, you can use a sturdy chair.
Electrical Tape: It’s for securing the connection of the kitchen hood.
Ducting pipe: It’s for venting air outside.
Carbon Filter: If you are venting outside, you will not need a carbon filter. But if you are venting inside, a carbon filter will be required.
Aluminum Duct tape: It will be necessary to seal the duct joints tightly to prevent any leak.
If you have those tools ready, time for the next step.
Safety Precautions Before You Start ( How to install Litrohub kitchen hood?)
Before you start your installation, the equipment and tools are available. You must know and follow some of the safety steps to save your home and your kitchen hood.
Turn off the power supply from the circuit breaker. Turning off the switch is not the safest option. Turning off the circuit breaker is required for your personal safety during the installation.
Always ground the good properly. It’s a crucial step to save yourself from electric shock. Double-check if the hood is connected to ground.
Do not use plastic ducts in any condition. Plastic ducts can be hazardous to health and the environment, and are also prone to melting in high heat.
Maintain a safe distance from the stove top; it should be at least 65-75 cm above the cooking surface. This is required for the effective suctioning function of the machine.
Never vent into attics, garages, or ceilings.
Work with caution to drill into the walls. Make sure there is no water pipe or electrical cable in the wall.
Wear safety gloves and protective gear while working with sharp metal and ducts.
How to Install Litrohub Kitchen Hood? DIY Step-by-Step Installation Process
Please follow the steps carefully.
Step 1: Turn off the circuit breaker for the kitchen hood installation. Do not work with live power.
Step 2: Unpack the kitchen hood from the box and check if all the parts are in the right condition. Remove the protective layer or film if there.
Step 3: Now time to choose your installation method. If you vent outside, set the internal adjuster to “outside” (figure A in Manual)
If you want to go ductless and use a carbon filter to pass the clear air inside, choose the “Indoor” setting. Note that carbon filters are not washable, and you will have to replace them every 3 months.
Step 4: Now decide if you want rear venting or top venting.
If you want to go for rear or horizontal venting, remove 6 rare screws and take off the rear seal plate. Then install the rear square outlet in the kitchen hood.
If you go for top venting, choose the round (Ø150 mm) or square top outlet supplied for your model. Mount it on the top and secure it with screws.
For both methods, remove the round knockout cover in the path you’ll use.
Step 5: Mark the mounting height. Ideally, it should be within 65 to 75 cm from the cooktop. If you have a gas stove, keeping it under 70 cm is standard practice.
Use a pencil or marker to mark the height and positions of the screw holes.
Step 6: Now it’s time for drilling and mounting. If you want to mount it on the wall, use the two preinstalled side brackets. Drill 2 wall holes and insert the iron expansion anchors. Then hang the hood and add screws to set it up.
If you want to mount it under the cabinet, drill 4 holes in the cabinet bottom. Secure the iron expansion anchor or screws. On slim models, attach the one-way valve before mounting if using ducting.
Step 7: Check if the hood is level. Adjust the hood if it’s not straight.
Step 8: Now time to install the venting. Make sure your home duct and hood outlet are the same size. If your home duct is smaller, use a metal reducer. Now install the vent outlet. If you are top venting, attach the round or square outlet with screws. If you are rear venting, remove the rear steel plate and screw in the square outlet.
Step 9: Now connect the duct. Always use rust-proof metal ducting for your kitchen hood. Avoid sharp bends. The metal ducts should not be bent over 90-degree angles.
Step 10: Plug into a grounded outlet with your kitchen hood. If the cord won’t reach the ground, take help from an electrician to extend it.
Step 11: Attach the decorative cover with two M4 screws.
Step 12: Now reinstall the grease filters. For a ductless setting, install the carbon filter behind the grill.
Step 13: Now time to turn off the power and test the kitchen hood. Turn on the circuit breaker. You should see the lights on button A. Try pressing B and E for dual motors and C and D for individual motors. Run briefly on high speed to check leak, noise, and airflow. Try cooking or boiling something. If you have done everything right, it should not cause any issues.
Step 14: For maintenance, clean with mild detergent and warm water every few weeks. Also, clean the grease filter from time to time.
FAQ
Can I use a plastic duct for venting the hood?
No, using plastic vents is one of the common mistakes for DIY kitchen hood projects. Kitchen hoods must contain a rustproof metal duct for venting.
Do I need a carbon filter for this hood?
If you are going ductless, then you will need a carbon filter to clean the air and release it in the kitchen. A carbon filter must be replaced every 3 months or 120 hours.
Warping Up
Installing the Litrohub kitchen hood is more DIY friendly than other kitchen hood brands. However, you need to have a clear idea about what you are doing and how it is done. This article provides a clear guideline for installing your kitchen hood. If you can follow them, you should not have any problem installing your hood. Don’t hesitate to contact us about any installation-related questions.
Read the how to maintain your range hood or best kitchen hood in Canada. To buy the most affordable and efficient range hood please check out Litrohub Affordable range hood.
This is a contemporary review of the 7 best pot lights in Ontario.
We are Litrohub, a rapidly growing brand with household lighting and plumbing products. With the help of highly experienced industry leaders, our content team tries to solve different issues and concerns related to light and water systems.
Pot lights, recessed lights, downlights, slim lights whatever you call them, it is the lighting of future earth. It is constantly getting smarter and more convenient to use in private and commercial spaces. In Canada, numerous companies make and sell pot lights. So it can be overwhelming to choose one for you.
This article will guide you in choosing the best-recessed light for your house or office. Here we will list the 7 best companies to buy pot lights from. And also explain details about their best product.
We have a lot to cover, let’s start!
The highlight of 7 Best Pot Lights in Ontario
Here are the lists of best pot lights with unique traits :
Best Overall : Votatec 4 Inch Gimbal LED Pot Lights
Best Modern Pot light : Lightrix 4” LED Slim Panel
Best Affordable pot light : MTC Canada 7-inch Slim Panel Light
Best Technology : Philips Hue Smart Recessed 6 Inch LED Downlight
Best Durability : Pelogona Heavy-Duty LED Recessed Downlight
Best Standard Pot Light : Lightline 4″ Round LED
Best Emerging Hero : LitroHubs’s 4-inch pot lights
Lets go deeper with our collective wisdom.
Best Overall : Votatec 4 Inch Gimbal LED Pot Lights
Added Features: Energy efficient, adjustable color temperature, airtight structure, CRI 80+ rating, thin design, included junction box
Certifications: ENERGY STAR certified, cETLus listed, ETL-Listed Safety Standards, IC rated
Deciding the best pot lights overall seemed hard. But Votatec’s 4-inch LED pot light made the task easy for us. With its convenient features, durability, and quality, it is undoubtedly an all-arounder recessed light.
However, note that there are other great products with similar quality. They are mentioned in other categories.
The light comes with a gimbal that allows you to change the direction. It can be tilted 38 degrees in any direction. With a set of Votatec’s pot lights, you can change the vibe of a room with great control.
The lights looked very bright, rich, and clear to us. It also includes smooth dimmable features. You can set the strength to 10% to 100%. With its durable and stylish black metal body, it can fit with any style and taste.
When it comes to light color and temperature, Votatch’s pot lights have pretty standard 3 color settings. 3000k for warm light, 4000k for balanced light, and 5000k for cool light. Adjust your color setting depending on your needs.
Wondering what is the role of different temperatures of lights? Read our detailed article about pot lights.
Personal rating: 8.9 out of 10.
Best Modern Pot light : Lightrix 4” LED Slim Panel
Name: Lightrix 4” LED Slim Panel 9W 750LM Potlight
Size: Fits hole sizes from 4-1/4 Inch (10.8cm) to 4-1/2 Inch (11.5cm); Junction Box: 3.94”L x 2.75”W x 1.35”H
Dimmable: Yes, Triac dimmable
Temperatures: Available in 3000K, 4000K, 5000K, or 6000K
Damp Rated: Yes, suitable for damp environments (not wet-rated)
Material: Aluminum
Directability: Fixed beam, 180° angle
Added Features: High energy efficiency, airtight, 50,000 hours life expectancy, comes with junction box and waterproof cables, 5-year limited manufacturer’s warranty
Certifications: Conforms to UL Std. 1598, Certified to CSA Std., Energy Star Certified, Intertek Certified, ETL Energy Star approved
Lightrix 4” LED Slim Panel light is an amazing choice for modern-style pot lights. It comes with 750 luman bright and clear light and a sturdy aluminum body. It is suitable both indoors and outdoors. All its cable and junction boxes are waterproof. The light can be installed in toilets and similar damp conditions. However, it is not fully waterproof.
With its smart angle beam, the lights can be directed 180 degrees. The manufacturer claims that the light will run 50000 hours without any issues. If you use it 3 hours a day, that’s 45 years! However, they only have a warranty for 5 years, which is always a plus.
The light comes with 4 color temperatures. It also has all the necessary certifications proving its safety and quality.
Personal Rating: 8.3 out of 10.
Best Affordable pot light : MTC Canada 7-inch Slim Panel Light
Added Features: Airtight, IC rated, easy and safe installation, no housing or can required, isolated external driver, 15W power consumption, 50,000 hours lifespan, suitable for multiple locations (residential, commercial, hospitality)
Certifications: cETL certified, conforms to Canadian and US standards
MTC Canada Standard LED Pot Light is one of the best in the market. It comes with 10 light packages, for just 199.89$. That means you are spending 20$ per pot light. Even though it’s very affordable, it comes with all the standard features.
The light comes with 3 changeable temperatures: 3000k, 4000k, and 5000k. It is made of aluminum and its compact design makes it suitable for damp conditions. It does not require additional housing, so the installation process is pretty simple.
The light has a smooth dimmable feature. You can set it 10% to 100% depending on your need. It also excels in energy saving consuming 80% less electricity than regular lights. With its 50000 hours run time, it will save a lot of electricity over the years.
From residential houses to commercial buildings, MTC Canada Standard LED Pot Light can be an affordable and quality option.
Personal rating: 9.0 out of 10.
Best Technology : Philips Hue Smart Recessed 6 Inch LED Downlight
Name: Philips Hue Smart Recessed 6 Inch LED Downlight
Size: 6 inches
Dimmable: Yes, control via app
Temperatures: White and Color Ambiance, millions of colors
Damp Rated: Not specified
Material: Metal
Directability: Fixed
Added Features: Voice control with Alexa or Google Assistant, dynamic light effects, compatibility with Hue Bridge for automation and remote control, compatibility with Matter for smart home integration, suitable for upgrading existing downlights to smart
Certifications: Not specified
When it comes to technologically advanced gadgets, very few brands can beat Philips. Philips Hue Smart Recessed 6 Inch LED Downlight is currently the best pot light in terms of technology.
It comes with an advanced LED chip, providing bright and clear light with minimal electricity. It does not have 3 or 5 colors, it has millions according to the manufacturers. Well, that means you can set any color and any shade with your mobile app. The app also allows you to dim the lights accurately with a few touches. For studios and filming setups, this pot light can be a game changer.
There are extra remotes for controlling the light. You can even change the light settings with Alexa and Google Assistant. The light also has dramatic effects. A pot light that works as a party light, it can’t get better! One downside of the pot light is that it has only 2 years of warranty.
Personal rating: 9.2 out of 10.
Best Durability : Pelogona Heavy-Duty LED Recessed Downlight
Added Features: Easy installation, energy efficient (saves up to 80% electricity), bright 1600 lumens, good seal and yellowing-proof, better heat diffusion, 5-year warranty
Pelogona Heavy-Duty LED Recessed Downlight is made of aluminum and acrylic. The aluminum body makes the structure strong. While the high-quality acrylic makes it more compact and leakproof. It’s undoubtedly one of the most durable pot light options in Canada.
The light is dimmable from 5% to 100%. It contains standard 3 temperatures, 3000k, 4000k and 5000k. It is wet-rated and can be installed in outdoors and bathrooms. The light comes with 1600 lumens of bright light while consuming 80% less electricity.
With cleaver heart diffusion technology, it fits well with insulation safely. The pot light is sealed tightly with acrylic. The high-quality acrylic does not get yellow over time. It also comes with 5 years of warranty.
Personal rating: 8.9 out of 10.
Best Standard Pot Light : Lightline 4″ Round LED
Name: Lightline 4″ Round LED Slim Profile Recessed Downlight
Size: 4 inches.
Dimmable: Yes, 100%-10% dimming capability
Temperatures: Available in 2700 K, 3000 K, 3500 K, or 4000 K
Damp Rated: Yes, suitable for wet locations
Material: Durable airtight aluminum body with UV stable paint and white PMMA diffuser lens
Directability: Fixed; 120° beam spread
Added Features: Airtight, suitable for direct contact with insulation, includes silicone gasket for wet location applications, TRIAC/ELV dimmers, includes extruded aluminum hardwire box with dimmable class II electronic LED driver, operating temperature range from -20°C to 40°C
Certifications: Not specified
Lightline’s standard pot lights are one of the standard options you can consider buying. It has 10 dimming settings, 10% to 100%. It also contains 4 temperature settings, 2700k, 3000k, 3500k, and 4000k. It contains the temperature settings that belong on the warm to natural part. Thus, it suites better in bedrooms or other comfortable places.
It is also wet-rated, so it will suit perfectly in humid places. The pot light can illuminate evenly in 120 degrees with its PMMA diffuser lens. Overall it’s another excellent light option you can count on.
Best Emerging Hero: 4″ LED Slim Panel Round 5 CCT
Name: 4″ LED Slim Panel Round 5 CCT
Size: 4 inches
Dimmable: Yes, smooth dimming with standard TRIAC dimmer
Added Features: 5 color temperatures switchable, high brightness with up to 810LM and 9 Watts, canless design for easy installation, includes junction box for quick wiring, ETL Listed, IC rated, wet rated, up to 50,000-hour lifespan, 5-year warranty
Certifications: ETL Listed
As an emerging brand, Litrohub showed some impressive potential with its high-quality pot lights. The lights are simplistic but can compete with some of the giant in the market. To be honest, some of its features beats the out there.
Firstly, let’s talk about temperature. It has the ideal range of temperatures. 2700k to 6000k. In its 5 temperature, you can enjoy both warm and cool lights according to your needs. Made of aluminum, it is stylish and durable.
It has a 50000-hour lifespan and 5 years of warranty. As it is damp-rated, you can use it in humid places.
However, as a new brand, it does not have a lot of certification which is reasonable. In the near future, Litrohub has a high potential to lead the market.
Personal rating: 9.3 out of 10.
Buying guide: Best pot lights in Canada
When trying to select a pot light, there are some important factors to consider. Types, temperature, dimmable, style, damp rating, housing type, can/ canless, etc. First point out what are the necessary features you want from your pot light. And then buy the pot light that suits you best.
Most pot lights have a standard design that fits naturally in modern houses. If you want something fancy, try browsing some decorative trim options. There is so much to learn about recessed or pot lights. Check out the pot light guide to get a complete idea.
FAQ: Best Pot Lights
When should you not use pot lights?
LED Pot lights are highly versatile but it has its limitations. It’s often not very powerful for the outdoors. It also needs to release the heat to function and be safe. Thus you should never install a pot light inside an insulation. Remove the insulation first.
How far should recessed lights be from one another?
One easy rule is to install the pot lights half the height of the roof from one another. That means if the roof is 8 feet. The pot lights should be 4 feet apart from each other. Later you can adjust the setting to balance the lighting.
Our Verdict: Best Pot Lights
From smart technology to environmental sustainability, pot lights are the lights of the new earth. The pot lights reviewed here are from the best brands in Canada. Take them as a sample product of those brands (we tried to choose the best ones). You can always research more products from those brands to find the best pot lights. Check Litrohub’s Pot light collections.
Lights are the metaphor for hope and happiness. The quality of lights impacts our mood, sight, and total environment. Pot lights, also known as recessed lighting or downlighting, are one of the best lighting solutions for modern homes. It looks smart and illuminates effectively with better control.
Intruducing LitroHub content team. We are a group of experts on home development, sharing our insights with utmost passion. Count on us for a detailed article on pot lights.
In this article we will explain, pot light aka slim panel, how it functions, its types, and qualities, how to install, replace, repair, sustainability aspects, buying guides, and a lot more!
Let’s start!
What is pot light?
Pot lights are modern lights that can be directly installed inside the ceiling or wall. It can be made of LED, fluorescent, halogen etc, but LED is the smartest and most popular.
It comes with three components: housing, trim, and bulb. The housing is the body that holds the light parts. Trim is the visible portion of light that can be decorative or plain. The trim filters balance the light’s color and spread. Finally, the bulb is the part that produces light.
History of pot light
The history of pot light takes us to the 1940s. At that time the concept of installing the light inside the ceiling appeared. This type of light was used in shop and commercial spaces to create balanced lighting. How a product looks in the shop directly affects its sales. Good lighting is essential for that.
In 1956, a company named Halo started producing recessed lights commercially. Their first product was named H1. After the great success of H1, they brought different types of pot lights, H2 to H7 to the market. Those lights are still being sold.
Later on, those lights started gaining popularity in private housing. Previously, incandescent and fluorescent lights were used in pot lights. After the invention of LED lights, it became the best choice for slim panel. LED lights are far more energy-saving and convenient than others.
How pot lights work?
These lights can be made of fluorescent, halogen, or other types, but LED bulbs are most common. LED lights produce light completely differently from other types of light. The full form of LED is light-emitting diode. The diode is a semiconductor microchip that releases light photons when electricity passes.
Other types of light generally use heat to create light. Those lose a lot of electricity to work. LED is the most efficient light option we have. It loses less than 20% of electricity on heat. Thus it uses 80% less electricity than regular bulbs.
Types of pot light
The types of pot lights can be categorized depending on different segments. Let’s take a look at them-
types depending on size
types depending on the function
types depending on the temperature
types depending on trim
types depending on the housing
types depending on the can
Depending on Size
4-inch pot lights— are the most stranded size. It is suitable for private houses and decoration purposes. Those pot lights can be easily installed in 4-5 inch deep ceiling holes.
6-inch slim panels— have more coverage. Usually used in wider spaces like corridors and stairs. They can also fit in general purposes.
8-inch lights— are suitable for commercial purposes. They are large and produce a lot of light. One may consider it for a garage or outdoor light in personal houses. Not that, there are more sizes like 3, 5, and others, but those are not as common as 4, 6, and 8 inches. The price of pot light goes higher for larger ones.
Depending on function
Deemable— These lights are great options for bedrooms, reading rooms, and similar places. In those places, you may not need the same power of light all the time. Being able to deem or brighten the light will add another level of comfort.
Non-dimmable— lights are great for corridors, stairs, kitchens, and all the places you don’t need to change the brightness of the light.
Temperature changeable— pot lights allow you to change the weave length of the light. This changes the total character of the light. They are mostly about preference but they also have a different purpose too. (more on this in the next part)
Smart pot lights— are lights that come with convenient technology such as remote control, voice control, or auto turn-off. Some pot lights have advanced sensors that detect your movement and turn it on and off. Those technologies are very convenient and save a lot of energy.
Wet-rated— pot lights are waterproof and designed for humid conditions like bathrooms.
Depending on temperature
Warm pot lights— comes with 2700k-3500k weave length of lights. It feels cozy and looks yellowish.
Balanced pot light— Balanced pot lights have a weave length between 3500k-4500k. Those lights are similar to daylight.
Cool pot lights— comes with 5000k to 6500k weave length. Those lights look blueish and more clear. ( wait for the temperature guide in the next part)
Some lights have one temperature while some have 3-5 temperature options.
Depending on trim
Reflector trim— comes with a mirror or reflecting material that increases the brightness and efficiency of the light.
Buffle trim— is the standard trim that consists of a narrow groove. It blocks extra light from spreading.
Adjustable trim— has the function of adjusting the direction of the light.
Decorative trim— comes with decorative material and designs enhancing beauty and aesthetics.
Depending on housing
For new construction— some pot lights are required to install the light housing in the ceiling cavity. This is a permanent and reliable solution for new houses.
For older houses— other types of housing systems are easier to install and don’t require access from above.
Depending on can
Can pot lights— come with a can that needs to be inserted inside the ceiling hole?
Canless pot lights— can be installed directly in the fixture.
Wondering how to know which type best suits your house? Check here.
Temperature guide of pot light
The color temperature of lights describes how warm or cool the light is. When choosing a pot light color temperature is a vital factor to consider. Some lights have different color settings which are best if you want more control on light color. Here are the temperature categories of the lights-
You may ask what to do with the temperature of a light. Let me explain. In most cases, lights that have neutral color are best. However, warm and cool lights are better suited for specific uses.
The warmer the light, the more comfortable you feel. It has less clarity but has a calm character. Therefore, it is best for bedrooms.
Neutral lights are better for most other spaces, like dining, kitchen, bathroom, etc.
Cool lights are more clear. It improves focus and visibility. So, cool lights are best for reading and workspace.
How many slim panels do you need in a room?
Once you decide to install pot lights the next big question appears— how many lights do you need? And how far they should be from one another.
It depends on a few important factors. The height of the ceiling, light power, and what your preferences are. But for general seamless lighting, you can follow an easy rule.
The pot lights should be half the ceiling height from one another. Let me break it down for you. If your ceiling is 10 feet, the lights should be 5 feet from each other. You can adjust the distance a bit according to your needs and preferences.
How to install a pot light
Installing a slim panel DIY is possible, but one must do it with caution. If you have some experience and tools for household DIYs, It should be easy for you.
The light comes with 3 parts: housing, trim, and bulb. With those essential parts, you will also get some necessary installing tools and a manufacturer’s guide. The manufacturer guide will contain specific directions to install the pot light. Make sure to read that first.
Follow the step-by-step process to install a pot light.
Step 1: Mark the spots
At first, turn off the electric cutout. Mark the specific spots where you want to install your light. Once you decide its time to check if the spot is suitable for the installation. Pot lights must be installed in the spots where no joist, or electrical cables are present. Plus, you will need at least 8 inches of space to install the light. Just drill a hole and insert an 8-inch stick to make sure it’s a good spot to start cutting.
If there is another floor above and there is less than 8-inch space, buy a low-clearance canister.
Step 2: Make a hole
With the pot light, you will receive a template sticker. It indicates the hole size that is right for installing the light housing. Attach the sticker and start cutting around it. Make sure to cut it perfectly or else the housing may not fit.
Step 3: Set the wiring
Once the hole is done, it’s time to work with the cables. Make sure the cutout is still off. Run the wiring from a power source to the hole. Leave at least 16 inches of extra wire.
Step 4: Setting up the junction box
Strip the wire and open the junction box of the light. Insert the cable inside the junction box. Now connect the wiring; black to black, white to white, and ground to ground. Close the junction box.
Step 5: Mount the housing
The housing have some clips that holds the housing once you insert it in the hole. First, pull the clips in so the housing can be mounted easily. Set the housing in the hole and push the clips out. The Housing should be set up tight in the position.
Step 6: Add the trim
The final step is to install the trim. The trim can have a rod spring or coil spring. For rod spring, fold the spring with your hand and set it up in the right position. For coil spring, attach the spring to dedicated spots and push the trim up.
Step 7: Add the light and enjoy
Now insert the right kind of bulb and turn on the electricity. If you have done everything accordingly, the bulb will answer with a glowing light. Congrats, why not make a nice cup of coffee and drink it under the bulb to celebrate the success?
How to replace a pot light
In some pot lights, you just need to remove the bulb and set up a new one. But for some other slim panels the light comes with the trim and cables. Those need a bit of effort to replace. Follow the simple steps below to replace a pot light.
Step 1: Turn off the electricity from the cutout.
Step 2: Pull the pot light from one side and take it out by squeezing the metal sticks.
Step 3: Now there will be a socket. Remove the old bulb from the socket. Keep aside the old light.
Step 4: Now take the new light and attach it to the socket. Once it’s done, squeeze the spring and set the lights in the position.
Step 5: Turn on the cutout and electricity. The light should turn on immediately.
LitroHub’s premium pot light
LitroHub is presenting high-quality stylish recessed/ pot lights in Ontario, Canada. There are a lot of sizes and features to choose from. Those lights come with advanced LED technology that saves up to 88% of electricity and runs over 50,000 hours.
Litrohub’s recessed lights are available in both fixed and adjustable color temperatures.
LED pot lights generally run over 50,000 hours. That’s at least 5-6 years of service!
Are pot lights a fire hazard?
Usually, pot lights are safe, but they can be a fire hazard if they come into contact with the insulators. The insulator materials can trap the heat and may start a fire. So, make sure to remove the insulation before installing the lights.
Do people put pot lights in bedrooms?
Yes, dimmable pot lights can be great options for bedrooms. Choose a warm-temperature light for the best comfort.
Are pot lights in style?
Yes, pot lights are evergreen and suit well with most styles and tastes. Choose the pot light trim that fits with the surroundings. (most are pretty neutral and add aesthetic character)
Warping up
With the style, convenience, and sustainability, there is no doubt that pot lights are our future. Its provides a clean look and also saves tons of electricity taking us towards a greener world. It’s smart and allows you to control the lights. Get your pot lights today and enjoy long years of seamless lighting.
This is a detailed review of 7 best kitchen faucets Canada.
Hi, we are Team Litrohub, a group of experts in household and plumbing solutions. With our years of cumulative experience, we can offer the best kitchen faucet solution specifically for Ontario, Canada.
There are a handful of good brands of kitchen faucets in Ontario. But some of them excel for their amazing features and convenience.
Stick with us to explore the seven best kitchen faucets Canada.
Highlight of 7 Best Kitchen Faucets Canada
Check out the best kitchen faucets Canada and their specialty.
Best overall: Grohe Concetto Single-Handle Pull-Down Kitchen Faucet
Best modern kitchen: Moen Arbor Motionsense Touchless Kitchen Faucet
Best affordable: WEWE Single Handle High Arc Brushed Nickel Pull Out Kitchen Faucet
Best for durability: Delta Faucet Leland Single-Handle Touch Kitchen Sink Faucet
Best premium kitchen faucet: Kohler Simplice Response Touchless Kitchen Faucet
Best smart faucet: Bio Bidet by Bemis FLOW Motion Activated Single-Handle Kitchen Faucet
Best emerging hero: LitroHub’s Pull-out Kitchen Faucet
Lets share our wisdom about the best faucets one by one!
It is obvious, that Grohe is one of the most popular kitchen faucet brands over the world. They have business spread over 150 countries. If you are looking to buy a kitchen faucet in Ontario, Grohe sinks will never go wrong.
For your convenience, we chose the coolest kitchen faucet for you. Grohe Concetto Single-Handle Pull-Down Kitchen Faucet can be said to be an ideal faucet. It features a function head and a pretty standard pull-down function.
If you ask us what is the best brand for kitchen faucets? We would refer Grohe for standard kitchen faucets. It’s durable, stylish, and easily blends with any style. The dual-function head is not really unique. Most brands have 2 or even 3 functions. But the control Grohe has is incomparable with any other faucets.
Grohe faucets are more expensive than other faucets option. It is one of the downsides of Grohe kitchen faucets. But considering its durability and long-lasting features, it’s worth it.
Added features: Three-function spray head, power clean.
Specialty: Touchless system for enhanced hygiene
Downside: Requires batteries
Need a modern kitchen faucet for extra convenience and ease of work? Consider Moen Arbor Motionsense Touchless Kitchen Faucet. It’s one of the best smart faucets you can find in Ontario.
It comes with beautiful chrome and polished color. It should look very decent in any type of setting. Even if it have some of the advanced technology, its does not looks like really high tech and futuristic. It’s more like a standard and beautiful one.
The sensor of the kitchen faucet is super smart. You can easily turn on and off the faucet just by holding something under it. It will allow you to clean something with extra hygiene. This is also very sustainable as it saves water.
The water flow of the faucet is seamless. You can easily control the water pressure with the handle and choose a suitable setting for water flow.
It also has a power cleaning technology which will be very helpful to clean efficiently. However, changing the battery may feel irritating sometimes.
Rating: 8 out of 10.
WEWE : Best Affordable
Name: WEWE Single Handle High Arc Brushed Nickel Pull-Out Kitchen
WEWE Single Handle High Arc Brushed Nickel Pull-Out Kitchen faucet is amazingly affordable and full of convenient features. The faucet is made of stainless steel and there can be no question about its durability. Its also come with an impressive classic style which will fit in any kitchen spaces. It will require a hole sink. So if you have multiple holes in your sink, you will have to use a mounting plate to cover them.
The faucet comes with 3 water flow settings, stream, spray, and pause. That’s more than many expensive branded faucets. The manufacturers also tried to make it easy to install. So if you are thinking about DIY, WEWE faucets will be an easier option.
It has a single handle to control water and temperature. However, the faucet only comes with a brushed nickel color, which may not be preferable for everyone.
Added features: TempSense LED indicator, InnoFlex PEX supply lines, optional AC adapter
Specialty: DIAMOND Seal Technology
Downside: Requires batteries or optional AC adapter
Delta Faucet Leland Single-Handle Touch Kitchen Sink Faucet shines both for durability and smart technology. Delta claims twice as much longevity than regular faucets. Diamond seal technology protects it from leaking and common problems.
It comes with chrome, arctic stainless, and few other great color option to choose from. It’s made with high-quality zinc and loaded with quite a lot of features and technologies.
The faucet uses smart touch technology to turn it on and off. You can touch the faucet with your elbow to turn it off and minimize the chance of contamination. It has a smart monitor that shows the water temperature, which is impressive for a faucet in the mid-price range. The faucet needs a battery to run, but the good thing is, the battery can run for up to 2 years without any change.
It has a really nice aesthetic design, which will easily fit in your kitchen space enhancing the beauty and smartness.
Features: Touchless on/off with Response® technology
Size: Spout height 15.6″, spout reach 9.6″
Certification: ADA
Added features: LED indicator, AC-powered operation, flexible supply lines
Specialty: Advanced touchless operation
Downside: Higher cost due to premium features
Looking for a high-end kitchen faucet? It’s hard to find a better than the Kohler Simplice Response Touchless Kitchen Faucet. The faucet is activated with a wave of hand, ensuring complete hygiene. The faucet is powered by AC current, so no worries about the battery. It’s also very easy to control the water flow. It contains 3 settings; stream, sweep spray, and boosted, which you can change with a simple touch.
The faucet has a high arch spout, making your pot filling and cleaning easier than ever. The pull-out head is also very convenient to use. It has a dock neck secure system which secures the pull-out head smoothly. Its master clean spray head is really effective in cleaning up dirt and mineral buildup.
The faucet comes with Vibrant Stainless, Matte Black, and Polished Chrome colors. You can choose the one that fits with your kitchen vibe. The installation process is also relatively simple. The faucet requires one hole to install, but if you have more than one, don’t worry. You will get an escutcheon plate with it. As a premium faucet, it costs a lot and may require special maintenance.
Rating: 8.7 out of 10.
Bio Bidet by Bemis : Best smart faucet
Name: Bio Bidet by Bemis FLOW Motion Activated Single-Handle Kitchen Faucet
Added features: Battery operated (4 AA included), no hardwiring required
Specialty: Touchless
Downside: Requires regular battery replacements
Bio Bidet by Bemis FLOW Motion Activated Single-Handle Kitchen Faucet come with impressive technologies without being too expensive. The faucet has a smart sensor that activates the faucet without a touch. So it will be easier to keep both your hand and faucet tidy and germ-free.
You can switch between modes with the touch of a button. Multiple modes and touch-free control will help you with effortless multitasking and efficient cleaning. It comes with a luxury finish with a stunning chrome color. However, more color options would have been better. The faucet is battery-powered and you will need to change the battery once a year.
Specialty: Durable materials and innovative design
Downside: Less reviewed
If you are into classic and low-tech kitchen faucets, Litrohubs pull-out kitchen faucets can be great suit for you. It’s an emerging brand in Ontario that has already created great weaves in household products. Litrohub has one model of kitchen faucet. To be fair, one is enough for a quality product! The faucet does not have sensors or automated functions, but that also means fewer worries about technological dysfunctions and batteries.
The product has two color options, satin and matt black. Both the colors are pretty standard. But the matt black is more popular among customers. That is reasonable as there are very few brands that have quality black kitchen sink options.
The faucet is durable and comes with a premium design and finish. It is made of brass, the best material for kitchen faucets. It also has a 360-degree pull-out head, which adds extra control and convenience. As a new brand originated from Ontario, it does not have a lot of reviews. But still, it has a promising market appearance with its attention to detail and customer service.
Take a look at LitroHub’s Kitchen Faucet.
Rating: 8.5 out of 10.
How to Choose the Best Kitchen Faucets Canada?
Choosing the right kitchen faucet for you depends on your needs and taste. Firstly find out what are the things you want to do with your kitchen faucet, and what features will be convenient for that. Remember more features may not always lead to more comfort.
Next, consider your kitchen design, and get a faucet that fits in the environment. It’s not a big issue as most kitchen faucet designs are neutral. But it’s something you should always keep in mind.
We have a specific article that explains everything about kitchen faucets and provides a more detailed guide to choosing a kitchen faucet. Read, All About Kitchen Faucets.
Our verdict: best kitchen faucets Canada
Choosing the right kitchen faucet is vital. It takes a low effort, but will have high impact in your everyday lifestyle. We listed the 7 best kitchen faucets Canada, which will help you to make a decision. Note that, we included one rock star product from each brand. They provide an initial idea about the brand. But obviously, there are many others to explore. Do your own research if you want. Hope you have fun times in the kitchen.
When you are looking for the best bathroom faucets Ontario, it means you are looking for 3 things combined. First, you are looking for a durable model. Second, you need promising and user-friendly functions. At last, a design that goes well with your bathroom decor.
We are the research team of Litrohub. Our main job this week is to test or experiment with different types of bathroom fixtures from popular brands and give our real-life verdict. So today, we are talking about the best bathroom faucets Ontario.
We will put lights on 6 of the bathroom faucet brands including their top products. After that, you get a buying guide as a bonus.
Thus, without further ado, let’s begin.
Why Trust Our Reviews
The first thing that may come to your mind is why you need to trust things we’re about to say. Or, What our specialties are that you can rely upon.
Our research team consists of experienced sellers, plumbers, DIYers, and homeowners. We combine our experience with bathroom fittings to judge and analyze the qualities of a product.
Apart from that, we always discuss with other experts across the country before talking about a bathroom faucet or anything. Most importantly, we tell only what we learn or understand after using the products.
Nonetheless, we also value the customer reviews regarding the products. So that our statement remains more authentic.
How We Tested Products
Rather than mentioning the top five or six products, we are naming the top 6 brands for bathroom faucets. Each brand has at least 10-15 types of bathroom faucets. So, you can understand that gaining real-life experience with 60-70 products in a short time is impossible.
That’s why we thoroughly researched the local markets first. Then, we figured out which brands earned the most number of pleasing customers. We also noted down the trending products from those brands.
After that, we did some online research again and shortlisted the names of brands and products. Finally, we bought most of them and tested them in different conditions. We also analyzed the brand policies and other related fields to understand more about the sellers.
Best Bathroom Faucets Ontario Reviewed
Here are our top 6 brands for the best bathroom faucets Ontario. You get to know all their good and bad sides here. From these reviews, you’ll be able to understand what’s the right one for your bathroom.
Moen – Quality in Budget
Moen has always been a good brand for high quality products in a reasonable price range. Most of their bathroom faucets come with a strong cartridge valve. Moen cartridges are sometimes considered universal due to their vast usability and compatibility.
Recently, the Moen Idora 84115 bathroom faucet has become the experts’ pick. This product is certified to be efficient. You can get more than 1.2 Gallons of water per minute from this faucet.
Although the main construction features plastic. You will find the handles made of metal. It assures that the handle system won’t fall or break even after millions of twists.
Both the reach and height of the spout are decent enough. The water won’t spill around so easily. The construction seems far better than 84980SRN Wellton, another high-quality model from the same company.
The popular Wellton series also fails to produce a premium outlook like Idora. Wellton has a brushed finish. Whereas Idora has a reflective chrome finish. This style suits well in modern bathroom decor.
But the lightweight Idora requires a bit more maintenance than 84980SRN. The reason is the same, the finish. Moen Idora can be a great addition to your personal bathroom space. The faucet will last more than a decade if used properly.
What We Liked
WaterSense certified
Easy to use handles
Generally weighs less than 1.5 kg despite being double-handled
Durable cartridge
Easy to mount
What We Didn’t Like
Easily gets moisture marks and fingerprints
Key Notes
While focusing on the 84115, we also compared it with a Wellton variant. Both have almost the same valve construction. If you want multiple handles with a better look, go for Idora models. But Wellton single-handle faucets would be great for tons of use daily.
Delta – for Lifetime Use
In search of the best bathroom faucets Ontario, we also found some high-quality bathroom sink faucets from Delta.Delta has a pretty long history of serving consumers with excellent bathroom fittings.
You can rely on Delta showerheads and bathroom faucets, which undergo tons of manual inspection before selling. According to our research, the best delta bathroom faucet is 2538 MPU DST. Delta has used its own Diamond technology here.
The diamond valve can seal the water gateway firmly to prevent any sorts of leakage. Also, you get the required essentials like drain assembly and supply lines with the bathroom faucet.
The price might seem a bit more than Moen or Litrohub faucets. But the accessories and features you get with the products are worth the price range.
For example, if you talk about the supply lines with this Lahara centerset faucet, they are leak-proof and corrosion-free for more than 50,000 uses.
Besides, the size and shape fit almost every bathroom sink. The extra heights seem a plus along with the perfect pex lines. However, you can also buy 35864LF faucet from Delta to save some bucks. This model comes without any accessories. But it has the most anticipated Watersense certificate.
What We Liked
Promising leakage-free performance
Better spout reach
Good material
Simple yet modern look
Versatile use
What We Didn’t Like
Average gasket
Key Notes
Delta faucets are found in mid to high price ranges. Depending on the price, the features and accessories vary. If you spend 40-50 bucks more than the usual mid-range prices, you can find a full package of Delta for your bathroom. The brand’s lifetime warranty will cover most of the normal issues you might face with the purchase.
Grohe – Overall Ideal Choice
No matter what type of bathroom faucets you like, Grohe is always there to provide you with the best options. There are a bunch of new designs and finishes in this year’s Grohe collection.
Among them, Eurosmart Cosmopolitan is our top pick. This single-handle faucet is currently the best choice for bathroom sinks and tubs. The construction is very simple. At first glance, it might look similar to some other shiny faucets. But after use, you’ll know the difference.
The valve firmly controls the water flow for years. You don’t need to move the handle too hard for that. Also, the size of the handle is good for all ages. The Silkmove cartridge technology reduces the possibility of a handle getting stuck so easily.
This type of cartridge is also capable of regulating the water pressure. It won’t break or fall off in huge water pressure too. So, don’t worry about replacing the Grohe cartridge anytime soon.
You can also try a good alternative to Eurosmart, 23085001 Bauloop. Here, the aerator is more angled than the previous one. It lets the spout to cover more area of the basin. Apart from that, most of the features are the same.
Most importantly, the whole faucet remains smooth and functional for a long time. No matter how much you use, the regulatory power of the valve remains like new.
What We Liked
Solid metal construction
Decent weight
Smooth handle
Good basin coverage
Survives tons of use daily
What We Didn’t Like
Comparatively costly option
Key Notes
You can install a Grohe faucet in your living room’s bathroom. This product can withstand rough uses. As you are spending a healthy amount, you need to use it with vessels that are used more frequently. Once you buy it, you’ll forget about replacing it.
American Standards – Best for Designs
There’s no other brand like American Standards with a rich history. With almost 150 years of quality production records, American Standards is the most reliable brand for bathroom fittings.
A key fact about this company is their versatility in products. You get different designs, shapes, and valve systems from this company. So, this one is worth trying for most of the homeowners.
While digging into their products, we found the 1340119.002 Pillar Tap Metering Faucet to be their top product. It’s your everyday low-profile faucet. It has great control over the water flow. If you have kids, try this to save water when they’re playing with the tap.
Nonetheless, you can also try their double-handle faucets, like 7186201.002 Fluent faucet. This product also comes with a brass construction.
You should know that most of the American Standard bathroom fixtures come with durable metal bodies. So, it’s a tough job to break the faucets so easily.
The reach of the spouts depends on what type of faucet you’re buying. It’s sure that the reach of every spout ensures no spill and waste of water in sinks. The angling of the aerators is engineered well too.
What We Liked
Versatility in design and construction
Different price ranges
High-quality metals
Great seller history
Pleasing after-sales services
What We Didn’t Like
High arch and double handle faucets are a bit heavy
Key Notes
When you are too confused about what to buy, the simple solution is to visit the American Standards store and pick one suitable for your sink.It is a global brand that doesn’t run out of stock. So,it’s rare for someone not to be able to find the right faucet for their home.
Kohler – for Luxury Bathroom Fixtures
Without a doubt, Kohler is the best brand for having exclusive bathroom fittings. From faucets to bathroom lights, everything from Kohler leaves a rich vibe in your space. Their products don’t come cheap. You have to spend a hefty budget to decorate your bathroom or shower with Kohler fixtures.
A real surprising fact that most of us are unaware of is this brand also offers sustainability. They got several certifications and approvals from global authorities. In WasteLab, recycles metals and other components to make quality items.
Testing several Kohler faucets was out of the question. Because of the price obviously. Still, we got our hands on K 596. You can use it on both kitchen and bathroom vessels. The design suits any bathroom decor.
The handle has a decent sensitivity. You can see the difference in water flow by the slightest handle shift. Such a smooth handle function is also seen in the 98827-4-CP Kumin faucet.
It’s not just the design, but the core is also better than several brands. Most of the Kohler faucets contain ceramic disc valves. It is another reason why the products cost too much.
Ceramic disks resist corrosion for more than a couple of decades. Despite being so durable, several products come with a lifetime warranty coverage.
What We Liked
Luxurious designs
Eco-friendly brand
Best type of valves
Durable finishes
Decent warranty policy
What We Didn’t Like
No regular or budget-friendly pricing from the brand
Key Notes
The price you spend to buy a Kohler faucet can let you buy at least 2 Delta or Moen faucets. But it’s obvious because the brand doesn’t offer any ordinary deals. The faucets are high-class, by all means. It’s best to pick Kohler fixtures for the bathroom attached to your bedroom.
Litrohub – the Rising Name
Litrohub is a Canadian brand for hardware solutions. They offer quality Kitchen, Bathroom, and lighting products that excel in elegance, simplicity, and beauty. The brand started its journey not long ago. Even so, the name has earned quite a reputation for selling quality products to their customers.
If you ask why we are putting our faith in a new name like Litrohub, it’s because of the effort. New brands and sellers always try to keep the commitment to stand tall among several other existing brands.
As Litrohub is starting to make their position, they’ll definitely give you the perfect bathroom faucet at a reasonable price. Litrohub bathroom faucets come in 4 different colors or finishes. The shape and design are the same.
This faucet is also tested during production. The water pressure regulation from the valve is accurate. Here, the simple handle construction is sensitive enough to give you the required water flow.
The company’s faucets can offer you 1.5 GPM or above. Which is also more than several Moen bathroom faucets.
The bonus part is you get to return the product within 30 days of purchase if you’re not satisfied with the features.
What We Liked
Brand success in a very short time
Simple and easy-to-install faucets
Great after-sale services
Elegant finishes
Reasonable pricing
What We Didn’t Like
Not too much variety like other brands
Key Notes
As it is a local brand in Toronto, they are focused on creating local establishments through their quality product. The company is eager to grow its business and generate more repetitive customers. Thus, you can gamble and place your order from their site right now.
Best Bathroom Faucet: Buying Guide
Now, let’s talk a bit about the facts you need to consider while buying the best bathroom faucets in Ontario.
Sink or Tub Requirements
First things first, you need to check what type of faucets fit on your basin or sink. It doesn’t matter even if you buy the best faucets Ontario if it doesn’t fit well on the vessel or deck.
Material
There are two types of material in the market; plastic and metal. Plastic materials are budget-friendly. But they won’t last long like metal ones. Still, there are some plastic bathroom faucets from reputed brands that might work better.
However, we suggest buying metal faucets. Especially stainless steel, zinc alloy, brass, and nickel. Among them, brass is super durable. It also costs a bit extra.
Valve
The cartridge valve system is a good choice for both performance and budget. Also, this type of core is easy to install. The cartridge system requires fewer parts and accessories.
However, the most durable option is a ceramic disc valve. They last for around 2-3 decades. But the catch is ceramic valves cost more than a stem or cartridge.
Color & Finish
The best type of color and finish depends on the interior of your bathroom. You need to make sure the new faucet color matches with the existing fixtures. The finish shouldn’t stand out. Instead, it should get mixed with the bathroom decor and enhance the scenario.
Recently, chrome finishes have become more popular. But some DIYers also refer to a matte finish with black or bronze color for less standout.
Spout Type and Height
There are different types of spout shapes. Such as swivel, gooseneck, arch, low profile, etc.
The shape also determines the reach of the aerator. Generally, gooseneck or arch spouts should be 6-10 inches high from the bottom of the sink. But low profile options are better when the height is just above 4 inches.
Handle Design
The handles of a faucet make the outlook, performance, and durability.
Whether you buy the knob or lever, you need to make sure the handle is neither hypersensitive nor stiff. It should be smooth and moderately sensitive.
Certifications
The most important label you need to check while buying the bathroom faucet is the WaterSense certificate. This tag ensures the product you’re buying is efficient and saves water.
Apart from that, there are some other certificates proving the quality or performance. But the more certified the product is, the less chance of it being budget-friendly.
Warranty
A faucet from any brand should come with at least a 2-year warranty period. However, most renowned brands are offering limited lifetime warranties with most of their bathroom fixtures. Very few brands like LitroHub are also offering an easy return policy if the purchase isn’t right.
Pricing
Any decent bathroom faucet, whether single or double-handled, costs more than 100 canadian dollars. But the ideal price range is always below 180 dollars. The only difference is luxury or exclusive fittings. They can cost twice or thrice.
FAQ
How long do faucets last?
The optimal performance of a bathroom faucet can last for 10-12 years. After that, it starts to degrade the performance. After 20 years or so, you must replace the faucet.
What brand of faucets do plumbers recommend?
Plumbers mostly recommend Moen, Delta, and Grohe. Because these brands offer all the basic features in a good price range. Also, they are quite durable. Recent days, Lirohub is a good name as well.
What is the most popular bathroom faucet finishing?
The most popular bathroom finish is chrome. After that, matte and satin come in the list. Some plastic faucets also come with a fake metallic finish.
Which bathroom faucet lasts the longest?
Brass faucets with ceramic disc valves last longer than any other type of faucets in the market. After that, you can consider stainless steel constructions with cartridge valves.
Are more expensive faucets better?
It’s not always like this. We agree that quality fixtures can cost you a little more. But that doesn’t mean faucets priced sky-high are the best. The term, better or best depends on your demands in performance and outlook.
Our Verdict : Best Bathroom Faucets Ontario
We hope today’s discussion helped you make a decision. There are nearly a hundred local and global brands of bathroom faucets. Among them, we narrowed down your search to six brands only. It should help you to find the right model easier than ever.
We will not ask you to buy Litrohub directly as our recommendation is a little biased here! However, if you also intend to change your kitchen faucet along with bathroom fixtures, then read this article.
